![ATX 22 Type-S Скачать руководство пользователя страница 91](http://html1.mh-extra.com/html/atx/22-type-s/22-type-s_owners-manual_3006274091.webp)
CARE AND MAINTENANCE
|
90
Make sure these steps are followed before using your boat:
•
Check and inspect the fuel and exhaust systems, the engine cooling and
lubrication systems .
•
If the swim platform was removed for storage, reinstall it .
•
Charge and reinstall battery into boat .
•
Check engine and bilge for signs of nesting animals; clean as necessary .
•
Check entire engine for cracks and leaks caused by freeze damage .
•
Check hose condition and all hose clamps for tightness .
•
Install bilge drain plug or any other drain plugs removed . Make sure all
plugs are installed correctly .
•
Perform daily maintenance . If not performed during lay-up, perform
annual maintenance .
•
Check and lubricate steering system .
•
Remove blocks from under trailer frame .
•
Tighten tie-downs and trailer winch line .
•
Check tire pressure and lug nuts on trailer .
•
Take the boat to the water and start it . It may take a minute of cranking to
allow the fuel system to prime . Allow a one-minute cooldown period for
every 15 seconds of cranking . When the engine starts, keep a close watch
over the gauge readings, and check for leakage and abnormal noises . Keep
speeds low for the first 15 minutes until the engine has reached normal
operating temperature .
Содержание 22 Type-S
