ATX 22 Type-S, Руководство пользователя

Страница: 61 / 100

TOUCH SCREENS
|
60
THIRD PAGE: GO TOUCH CONTROLS
To enable the Go Wake, Go Ski, or Go Surf system, navigate to the Go Touch
screen through the screen menu button . When you first navigate to this screen,
you will see 3 options above the word go . Select what you would like to do, and
then press go .
Go Wake/Go Ski
When Go Wake is enabled, the first choice you will need to make is Beginner,
Intermediate, or Pro . Your choice affects the initial speed and TAPS plate position .
Speeds and positions vary by model . Once a selection is made, the system will
automatically set your cruise control and TAPS plates . The Go Ski setting is very
similar to the Go Wake setting . Choose beginner, intermediate or pro and the
system will set your TAPS and cruise control appropriately .
Go Surf
When Go Surf is enabled, the default is set up to surf the port side of the boat . To
switch sides, press the right arrow near the Go Surf indicator . The default values
for the Go Surf system will yield a steeper, larger wave . The height/length of the
wave can be adjusted using the Mellow-Steep keys or the Wave Tune button .
The Mellow-Steep keys alter the position of the outer TAPS 3 plates and Wave
Tune adjusts the position of the center TAPS plate . To adjust the center TAPS plate,
you can either use the rocker switch on the throttle or press “Wave Tune” and use
the +/- buttons . The Go System is set up to give a good starting point for each
watersport .
Depending on boat loading and personal preference, you may need to adjust
from the default settings provided . Cruise control can still be manually adjusted
on the cruise page .
To exit out of the Go System and regain manual control of the boat, press the
icon at the top of the circle that shows which Go System you are using . This will
bring you back to the initial Go Touch screen where you can then select off .