16
3
Enter the Administrator (
Admin
) password
where indicated.
4
Enter appropriate information into the
New
Admin Password, Confirm New Admin
Password
or
New Read Only Password
and
Confirm New Read Only Password
text
boxes.
5
Click
Submit.
6
If you have completed all changes for this
session, go to the
Restart
page and restart the
Fibre Bridge.
Enhance performance
SpeedWrite is a method to improve the
performance of WRITE commands to SCSI tape
devices attached to the FibreBridge.
Using the CLI command
SpeedWrite
, you can
specify the SCSI bus, target and LUN of a
mapped device or specify [all] to set or get the
state of all currently mapped SCSI devices.
SpeedWriteDefault
specifies the state of
SpeedWrite
for any SCSI devices mapped
manually or via an
AutoMap
operation. If
enabled, any new SCSI device uses
SpeedWrite
performance enhancement by default.
1
Follow the
Preliminary steps
.
2
From the left hand menu, click on
Storage
Management.
3
Select the parameters you wish to change.
4
Click
Submit.
5
If you have completed all changes for this
session, go to the
Restart
page and restart the
FibreBridge.
Содержание FibreBridge 2390C
Страница 5: ...Appendix D Warranty information xix Manufacturer limited warranty...
Страница 51: ...xx...
