manualshive.com logo in svg

ATS BBR2S, Инструкция по эксплуатации

Поделиться
Скачать
ATS BBR2S Скачать руководство пользователя страница 41

36

MAN - BBR2S - REV: Original | E. Operation

6.  When the test is complete the system will automatically generate a report and display it.

View Test

View Test is used to look at test data for tests that have already been run and saved. When you press the VIEW 

TEST button the screen shown in Figure E.13 will display.

The TEST DATA sections allows users to select different test runs already saved. Press the down arrow button to 

 

show a list. Once a data set has been selected, the data is displayed in the graph.

Press the SHOW DATA button to open a dialog that shows a table of the data values for the selected run. It can also 

be printed from this dialog.

The SHOW REPORT button will open the report that was generated for the selected test run.

Use the TIME switch to change between FULL GRAPH and ZOOM. ZOOM will let you zoom in on the time scale 

and put a scroll bar under the graph to allow you to move the display back and forth.

You can also click on either end of any of the scales to change that value to zoom in on just part of the graph. Keep 

in mind that pressing the TIME switch will reset this.

E.9 Diagnostics

When you press the DIAGNOSTICS button the screen in Figure E.14 will be shown.

You should not have permission for this screen unless you are experienced with the machine and what it does.

There are no safety features in this screen. It should mostly be use for maintenance to trouble shoot I/O problems.

Figure E.13 - View Test main software screen

Содержание BBR2S


















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды