manualshive.com logo in svg

ATS BBR2S, Инструкция по эксплуатации

Поделиться
Скачать
ATS BBR2S Скачать руководство пользователя страница 28

MAN - BBR2S - REV: Original | E. Operation

23

Operator Name Field

Allows you to select a user to edit. Use the down arrow button to drop down a list of users saved on the system. 

Password Field

Contains the current password for the selected user. If this field is left blank no password will be required to log in as 

this user, but this user will not be able to add a password in the future.

User Privilege Switches

The first three user privilege switches set up privileges or permissions for the system:

•  Edit Users – Allows this user to edit any of the users on the system.

•  Diagnostics – Allows this user to enter a diagnostic or maintenance screen. 

NOTE: Extreme caution should be used with this permission as there are no safety restrictions 

in this screen.

•  Standardization - Allow this user to perform a standardization on the system.

Currently switches 3, 4, and 5 do not add or remove  any additional permissions.

Save Button

Saves the current user. 

This should be done any time you make any changes you want to keep. If you exit 

this screen without pressing SAVE you will lose any changes you have made.

Copy Button

Makes a copy of a selected user under a new name. This is useful if you need to make a new user with similar 

permissions as a current user. Press “Save” when complete.

Figure E.3 - Edit Users dialog

Содержание BBR2S


















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды