Atmos E 341 Скачать руководство пользователя страница 4

Страница: 4 / 60

Introduction

1.0 Introduction

1.1 Information on operating instructions

These operating instructions contain important notes on how to

operate the ATMOS

E 341 Battery safely, correctly and effectively.

The instructions are intended for the training and teaching of

operating personnel and are intended as a reference. Reproduction,

even partial, is only permitted with written permission from ATMOS.

These operating instructions must always be kept available near

the device.

Care, period tests, regular cleaning and proper application are

indispensable. They guarantee the operational safety and usability of

the ATMOS

E 341 Battery.

Maintenance, repairs and period tests may only be carried out by

persons who have the appropriate technical knowledge and are

familiar with the product. To carry out these measures the person

must have the necessary test devices and original spare parts.

Prior to start-up please peruse chapter „2.0 Hints for your safety“

on page 11, in order to be prepared for any possible dangerous

situations. This helps you avoid potentially dangerous situations.
The product ATMOS

E 341 Battery bears CE marking CE 0124

according to the EC Directive of the council for medical products

93/42/EEC and meets the basic requirements of Appendix I of the

directive.
The product ATMOS

E 341 Battery complies with all applicable

requirements of the Directive 2011/65/EC restricting the use of certain

hazardous substances in electrical and electronic equipment (“RoHS”).
The declaration of conformity and our general standard terms and

conditions can be obtained on our website at www.atmosmed.com.

The quality management system at ATMOS has been certified

according to international standards EN ISO 13485.

These operating instructions are valid for the following devices:

ATMOS

E 341 Battery

REF 319.0000.0

ATMOS

E 341 Battery / DDS

REF 319.1000.0

ATMOS

E 341 Battery / Serres

REF 319.1100.0

ATMOS

E 341 Battery / Medi-Vac

REF 319.1200.0

ATMOS

E 341 Battery / Universal bracket

REF 319.1300.0

Some figures show the ATMOS

C 341 Battery. However, the devices do not differ in

their functionality described.

Содержание E 341





























































Результаты поиска

Содержание E 341

Отзывы:

Atmos E 341, Руководство по эксплуатации, Страница: 4 / 60

Результаты поиска

Содержание E 341

Отзывы: