21
Setting up and starting up
12. Place the canister system upright into the support and at the same time position
the suction hose in the hose guide.
click
13. Check that the clip
1
of the canister lid is correctly attached to the support of the
canister system.
1
»
The vacuum connection from the pump to the canister system is established.
14. Check whether the hose has a kink. If applicable, remove the kink.
15. Insert the suction hose into the hose guide of the device base.
16. Wrap the suction hose onto the hose rewind.
17.
If required: Connect a fingertip to the suction hose.
18. Perform a manual function check: Chapter „6.2.1 Manual function check“ on page
42.