Atmos E 341 Скачать руководство пользователя страница 10

Страница: 10 / 60

Introduction

Universal bracket (not mounted)

Support for

canister system

Vacuum hose

with angled

connection



Hydrophobic bacterial and viral filter is not included in the scope of delivery and

must be ordered separately for use with a canister system without an integrated

bacterial filter.

Not included in the scope of delivery:

•  Suction catheter
•  Adapter for vacuum mattresses
•  Serres

suction bag 1 l

• Medi-Vac

suction bag 1 l

• Wall and device support

1.7 Transport and storage

Only transport the device in a shipping container, which is padded and offers sufficient

protection.
If damage occurs during transport:
1. Document and report the transport damage.
2. Fill in form “customer complaint/return shipment”. This form is enclosed with each

delivery and can be found at www.atmosmed.com.

3. Send in the device to ATMOS (chapter „6.3 Sending in the device“ on page 44).

Environmental conditions for transport and storage:

• Temperature:

- 40...+ 70 ° C

• Relative humidity:

5...95 % without condensation

• Air pressure:

540...1100 hPa

Содержание E 341





























































Результаты поиска

Содержание E 341

Отзывы:

Atmos E 341, Руководство по эксплуатации, Страница: 10 / 60

Результаты поиска

Содержание E 341

Отзывы: