manualshive.com logo in svg

Atmos E 341, Руководство по эксплуатации, Страница: 11 / 60

Поделиться
Скачать
Atmos E 341 Скачать руководство пользователя страница 11

11

Hints for your safety

2.0  Hints for your safety

The safety of the ATMOS

®

 E 341 Battery complies with all the recognized rules of 

technology and the Directives of the Medical Devices Act.
Read and follow the safety instructions carefully before using the product. 

2.1  General safety information

Make yourself familiar with the device at an early stage, so you can use it even in hectic 

situations.
Never operate the unit, if it shows any obvious safety defects. Check the unit at regular 

intervals for safety and function.

2.2  Danger for users, patients and third parties

Take care that the device is always functional and ready for use.

Your patient may suffocate. 

•  Ensure that the device is always ready for use in an emergency.
•  Position the unit in an easily accessible location and keep access free.
•  Make sure that the charging accessories are functional. Replace defective charging 

accessories immediately.

•  Recharge the battery at the latest after 6 months, even if you do not use the device.
•  Perform a function check after each use. Perform a function check every 4 weeks in 

case you do not use the device for a longer period.

•  ATMOS recommends always having another suction device ready to hand in case of 

any device failure. So you can suck even in the event of equipment failure.

•  Please observe the notes on electromagnetic compatibility (EMC) of the device.

Avoid misapplication.

Your patient may be seriously injured.
•  The ATMOS

®

 E 341 Battery may only be used by persons who were medically 

trained, and were trained in the medical suction.

•  Please select the vacuum according to the patient and the application.
•  Observe the valid guidelines.

Reduce the risk of infection for you and your patients!

Deadly diseases can be transmitted.
•  Always wear disposable gloves, if you could come into contact with secretion.
•  Never use components marked with 

2

 more than once. These components are 

intended for single use only.

•  Only use sterile packaged parts, when the packaging is undamaged.
• 

Do not operate the device without a bacterial filter.

Содержание E 341





























































Отзывы:

Нет отзывов