Atmos Audio Cube 31 Скачать руководство пользователя страница 49

Страница: 49 / 52

Notes on EMC

Guidelines and Manufacturer´s Declaration - Immunity

The product ATMOS

Audio Cube 31 is intended for use in the electromagnetic environ-

ment specified below. The customer or user of the audiometer should ensure that it is

used in such an environment.

Immunity Test

IEC 60601- Test

Level

Compliance

Level

Electromagnetic Environment - Guid-

ance

Conducted

interference

according to IEC

61000-4-6

3 V

rms

3 V

rms

Portable and mobile communications

equipment should be separated from

the audiometer including the cables by

no less than the distances calculated/

listed below.
Recommended distances:
d = 1.17 * √(P)
d = 1.17 * √(P)
where „P“ is the max. power in watts (W)

and d is the recommended separation

distance in meters (m).
Field strengths from fixed transmitters,

as determined by an electromagnetic

site

survey, should be less than the

compliance level

Interference may occur in the vicinity of

devices which bear the following symbol:

Radiated RF IEC

61000-4-3

3 V/m
80 MHz to 1.0

GHz

3 V/m

NOTE 1
With 80 MHz and 800 MHz the higher frequency range applies.
NOTE 2
These guidelines may not be applicable in all cases. The emanation of electromagnetic waves

is affected by absorption and reflection of buildings, objects and people.

The field strength of stationary transmitters, such as base stations of cellular phones and

mobile terrain radio equipment, amateur radio transmitters, cbm broadcast and TV stations

cannot be predestined exactly. To determine the electromagnetic environment in regard

to stationary transmitters, a study of the location is to be considered. If the measured field

strength at the location where the audiometer is used exceeds the above compliance level,

the audiometer must be observed to verify the intended use. If abnormal performance char-

acteristics are noted, additional measures might be necessary, e. g. a changed arrangement or

another location for the audiometer.
b
Within the frequency range of 150 kHz to 80 MHz the field strength should be below 10 V/m.

Recommended safety distance between portable and mobile RF Communications

equipment and the audiometer

The product ATMOS

Audio Cube 31 is intended for use in electromagnetic environment

in which radiated disturbances are controlled. The customer or user of the audiometer

can help prevent electromagnetic interference by maintaining a minimum distance

between portable and mobile RF Communications equipment and the audiometer as

Содержание Audio Cube 31





















































Результаты поиска

Содержание Audio Cube 31

Отзывы:

Похожие инструкции для Audio Cube 31

Бренды по названию

Популярные бренды

Atmos Audio Cube 31, Руководство по эксплуатации

Результаты поиска

Содержание Audio Cube 31

Отзывы:

Похожие инструкции для Audio Cube 31

Бренды по названию

Популярные бренды