Atmel AVR2052, Быстрый старт

Страница: 4 / 67

4
Atmel AVR2052
8200M-AVR-11/11
3 Getting started
This document describes how to quickly get Atmel BitCloud running. A typical starting
scenario consists of the following:
• Setting up the development environment. Note that platform-specific details are
moved to the corresponding appendix chapters, as described in Table 3-1
• Programming several devices with demonstration firmware. This topic is also
described in the corresponding appendix chapter
• Monitoring activity of a network formed by the devices, with a sample wireless
sensor network (WSN) monitor PC application provided with the SDK. This topic is
described in detail in Chapter 4
• Starting the development of new or modifying existing applications based on the
BitCloud C API, as shown in Chapter 5
The BitCloud SDK is available for several platforms, as described in Section 2.1 , and
so before proceeding, select the SDK version that matches your target platform.
The majority of instructions for setting up the BitCloud stack and applications depend
on the specific platform and evaluation kit. To get started, proceed to the platform-
specific sections listed below.
Table 3-1.
Hardware-specific getting started sections.
For platform Refer to Section
ZigBit 8.1
megaRF 9.1
UC3 10.1
XMEGA 11.1
SAM7X 12.1
SAM3S 13.1
After completing the installation, try running the WSNDemo application by
programming the devices with ready-to-use images, as described in Section 4.2 .