Atlona OmniStream AT-OMNI-112 Скачать руководство пользователя страница 8

Страница: 8 / 57

AT-OMNI-111 / AT-OMNI-112

The Atlona OmniStream™ 111 (AT-OMNI-111) is a networked AV encoder for one HDMI source up to 4K/UHD,

plus embedded audio and RS-232 control. The Atlona OmniStream™ 112 (AT-OMNI-112) adds a second channel

of encoding for two HDMI sources up to 4K/UHD and RS-232 control and can deliver duplicate AV streams to

two networks for full system redundancy in mission-critical applications. OmniStream features SMPTE VC-2

compression for critical-quality video applications, with extremely low, sub-frame latency from encode to decode.

It also includes selectable AES-128 encryption and SMPTE 2022-5 Forward Error Correction (FEC) for robust AV

distribution spanning multiple networks. This encoder is housed in a half-rack width enclosure. Both OmniStream

encoders are housed in compact enclosures that easily fit into a half RU space. They can be powered over the

network through Power over Ethernet (PoE) or optionally from local AC power.

OmniStream was engineered from the ground up at Atlona to deliver the performance and dependability of traditional

AV distribution, with the virtually unlimited scalability and cost efficiency of integrating over data networks. It

addresses the many challenges AV and IT integrators encounter with implementing networked AV systems, while

delivering immediate and long-term ROI to end users in enterprises and other organizations

Introduction

Features

Package Contents

OmniStream Single-Channel Encoder

1 x AT-OMNI-111

1 x Phoenix terminal block, 6-pin (push spring)

1 x Wall/table mounting brackets

4 x Rubber feet

1 x Installation Guide

OmniStream Dual-Channel Encoder

1 x AT-OMNI-112

1 x Phoenix terminal block, 6-pin (push spring)

1 x Wall/table mounting brackets

4 x Rubber feet

1 x Installation Guide

OmniStream Single-Channel Encoder

•

Single-channel AV encoder for HDMI up to 4K/UHD

•

SMPTE VC-2 compression

• RS-232 control

•

Selectable AES-128 encryption

•

SMPTE 2022-5 FEC

•

Powered using PoE or optional external 48V DC

power supply

OmniStream Dual-Channel Encoder

•

Dual-channel AV encoder for HDMI up to 4K/UHD

• Secondary channel provides redundancy for

mission-critical applications

•

SMPTE VC-2 compression

• RS-232 control

•

Selectable AES-128 encryption

•

SMPTE 2022-5 (FEC)

•

Powered using PoE or optional external 48V DC

power supply

Содержание OmniStream AT-OMNI-112


























































Результаты поиска

Содержание OmniStream AT-OMNI-112

Отзывы:

Бренды по названию

Популярные бренды

Atlona OmniStream AT-OMNI-112, Руководство пользователя

Результаты поиска

Содержание OmniStream AT-OMNI-112

Отзывы:

Бренды по названию

Популярные бренды