AT-OMNI-111 / AT-OMNI-112
21
Configuration
If the
Video
block is not visible, use the scroll bar on the right side of the screen to scroll up or down.
Note that the available selections in the
Encoder
drop-down list are the same names that are assigned to
each encoder block, under the
Encoding
tab: vc2_encoder1 is assigned to hdmi_input1 and vc2_encoder2 is
assigned to hdmi_input2.
5.
Make sure that the check box next to
Enabled
is
checked. To disable video, at any time, click the
check box to remove the check mark.
6. Enter the destination multicast IP address in the
Destination IP Address
field. By default, AMS will
automatically populate this field.
7.
Enter the port number in the
Destination UDP Port
field.
Scroll bar
Session
tab
Encoding
tab
Video enabled
