Atlona OmniStream AT-OMNI-112 Скачать руководство пользователя страница 47

Страница: 47 / 57

AT-OMNI-111 / AT-OMNI-112

The AMS Interface

Network Info tab

The

Network Info

tab provides the ability to enable or disable DHCP mode for each video channel. When DHCP

mode is disabled, the IP address, subnet mask, and gateway must be provided. If using the dual-channel version,

then the information on both Channel 1 and Channel 2 are provided. This screen is identical to the

Network Info

tab

for the decoder.

Name

The name / Ethernet cable ID, used by AMS, to identify the channel.

Enabled

This field indicates that the video stream, for this channel, is active.

Carrier

If this field is true, then an active link exists. Otherwise, this field is set to false.

DHCP

Select the desired network mode in the

DHCP

field. Click the

radio button to enable DHCP. Click the

Off

radio

button to disable DHCP. When DHCP is set to

Off

, enter the network settings by using the

IP Address

Subnet

and

Gateway

fields.

IP Address

The IP address used by the channel.

Subnet

The subnet mask for the channel.

Gateway

The gateway (router) address for the channel.

Link Speed

Displays the port speed in Mbps.

MAC Address

The MAC address of the channel.

Содержание OmniStream AT-OMNI-112


























































Результаты поиска

Содержание OmniStream AT-OMNI-112

Отзывы:

Бренды по названию

Популярные бренды

Atlona OmniStream AT-OMNI-112, Руководство пользователя

Результаты поиска

Содержание OmniStream AT-OMNI-112

Отзывы:

Бренды по названию

Популярные бренды