manualshive.com logo in svg

Atlona OmniStream AT-OMNI-112, Руководство пользователя

Поделиться
Скачать
Atlona OmniStream AT-OMNI-112 Скачать руководство пользователя страница 19

AT-OMNI-111 / AT-OMNI-112

19

Configuration

6.  Select the subsampling value from the 

Subsampling

 drop-down list. 

 

 

 

 

 

 

 

 

 

 

7.  Click the 

Force YUV

 check box to use YUV color space.  This option is usually required when connecting a DVI 

source with an HDMI cable.  DVI uses RGB color space and will cause the output image to appear “pink”.

 

 

 

 

 

 

 

 

 

 

Dual-channel encoder only:

8. 

Repeat steps 3 through 7 for the 

Encoder 2

 section.  If a secondary HDMI source is not connected, then these 

fields may be left at their current settings.  The 

Encoder 2

 block will only be available when using a dual-channel 

encoder (AT-OMNI-112).

 

Dual-channel / single-channel encoder:

9.  Click the 

Save

 button, near the bottom of the page, to save all changes.

 

 

 

 

 

 

 

 

 

 

 

10. 

Once changes have been successfully applied, a message box will be displayed indicating that all changes were 

updated.  Click the 

OK

 button to dismiss the message box.

Содержание OmniStream AT-OMNI-112


























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды