AT-OME-MS42
64
Configuration and Management Interfaces
Telnet Login Mode
Click this toggle switch to set the Telnet Login Mode to
ON
or
OFF
. If set to
ON
, then login credentials (same as web
server) will be required when starting a Telnet session.
Telnet Timeout
Click this drop-down list to select the timeout interval, in seconds. Range is: 1 to 10000 seconds, or Never. Refer to
Adjusting Telnet Timeout (page 45)
for more information.
Hostname
Displays the hostname of the AT-OME-MS42, as it would appear on a network. To change the hostname, type
the new hostname in this field and click the
Save
button. Refer to
Setting the Host Name (page 46)
information.
Authentication
Click this drop-down list to select the authentication method when using the 802.1x security protocol. Refer to
for more information.
Front Panel Lock
Click this toggle switch to
LOCK
or
UNLOCK
the AT-OME-MS42. Refer to
Locking / Unlocking the Front Panel (page
for more information.
Reset to Default
Click the
Factory Default
button to reset the AT-OME-MS42 to factory-default settings. Refer to
Factory-Default Settings (page 50)
for more information.
Firmware Update
Click the
Choose File
button to begin the firmware update procedure. Refer to
Updating the Firmware (page 78)
for more information.
Velocity Update
Click the
Choose File
button to upgrade the Velocity database in the AT-OME-MS42.
