►
Release the filler cap slowly to let pressure
escape.
►
Never overfill the fuel tank.
►
Make sure the filler cap is screwed on when the
machine is used.
►
Avoid spilling fuel on the machine, wipe off any
spilled fuel.
►
Check regularly for fuel leaks. Never use the
machine if it is leaking fuel.
►
Never use the machine in the proximity of material
that can generate sparks. Remove all hot or
spark-generating devices before starting the
machine.
►
Never smoke when filling the fuel tank or when
working with the machine or servicing it.
►
Only store fuel in a container that is specially
constructed and approved for the purpose.
►
Consumed fuel and oil containers must be taken
care of and returned to the retailer.
►
Never use your fingers to check for fluid leaks.
WARNING Unexpected movements
The machine is exposed to heavy strains during
operation. If the machine breaks or gets stuck, there
may be sudden and unexpected movement that can
cause injuries.
►
Always inspect the machine prior to use. Never
use the machine if you suspect that it is damaged.
►
Keep your feet away from the machine.
►
Never sit on the machine.
►
Never strike or abuse the machine.
►
Pay attention and look at what you are doing.
WARNING Engine running hazard
Vibrations from the engine can cause material
changes, this can cause the machine to move and
cause injuries.
►
Never leave the machine with the engine running.
►
Ensure that only authorized personnel operate the
machine.
►
Never give the transmitter to anyone who is not
fully familiar with the machine, its operation and
safety directives.
WARNING Transmitter hazard
If the operator is not fully familiar with the control
system when operating the machine, this may lead
to sudden and unexpected movements of the
machine which can cause injuries.
►
Always study this safety and operating instructions
carefully before operating the machine.
►
Only trained personnel who are fully familiar with
the control system may operate the machine.
WARNING System error hazard
Errors in the system can cause injury. If any error
occurs in the system:
►
Switch off the start/stop switch on the transmitter.
►
Switch off the battery disconnector.
►
Unplug the power supply cable to the machine.
7
© 2013 Atlas Copco Construction Tools AB | No. 9800 1387 01 | 2013-07-01
Original instructions
Safety and operating instructions
LH 804
