Stopping the engine, Hatz
1. Stop the vibration by inactivating the joystick (A).
F
+
-
A
C
B
2. Set the speed switch (B) to low (tortoise).
3. Let the engine idle for a few minutes.
4. Push the start/stop switch (C) back. The buzzer
(D) sounds when the engine stops.
E
D
5. Open the rear hood and twist the battery
disconnector (E) back to stop the buzzer.
6. Turn off the transmitter with the on/off button (F),
the LED indicator light turns off.
7. Place the transmitter in its transportation position
in the machine or store it in a safe place.
Operating
Operation
♦
Give full throttle by setting the speed switch (A) to
high (hare).
A
+
-
♦
Repeating the high speed setting is only possible
after 30 seconds of low speed.
NOTICE
Vibration is activated when the joystick is
used.
Cable control
NOTICE
The connector must be cleaned before
mounting the cable. Damaged connectors must be
replaced by authorized personnel.
The machine can be operated by cable control.
♦
Mount the cable (A) on the receiver.
A
21
© 2013 Atlas Copco Construction Tools AB | No. 9800 1387 01 | 2013-07-01
Original instructions
Safety and operating instructions
LH 804
