Lifting point label
Use ear protectors label
Pressure label
Data signs label
The identity plate is positioned behind the battery on
the transmitter.
A
B
C
A.
Serial number
B.
Model designation
C.
Frequency band
Transport
Lifting the machine
WARNING Lifting hazard
Never lift the machine without checking if it is intact.
A damaged machine can fall apart, which can result
in serious injury.
►
Check that all equipment are dimensioned in
accordance with applicable regulations.
►
Never tow the machine.
►
Never walk or stand under a lifted machine.
►
Only lift the machine by a hook on the frame.
►
Check that the shock absorbers and safety frame
are correctly attached and not damaged.
►
Check that the safety straps are not damaged,
change if necessary.
►
Check the machine's data plate for weight
information.
Lifting the machine
♦
Before lifting the machine check that the shock
absorbers (A) and safety frame lifting point (B) are
correctly attached and not damaged.
♦
Only use the safety frame lifting point (B) for lifting
the machine.
B
A
Towing and retrieving
NOTICE
Only tow the machine to retrieve it when
it has stuck in loose ground during operation.
When towing or retrieving a machine, the towing
device must be connected to both towing
attachments (A), front and rear, on the bottom plate
of the machine. Pulling forces must act longitudinally
on the machine. Maximum permitted pulling force is
15 kN horizontally in the longitudinal axis of the
machine.
© 2013 Atlas Copco Construction Tools AB | No. 9800 1387 01 | 2013-07-01
Original instructions
14
LH 804
Safety and operating instructions
