A
A
Secure transport
WARNING Transport hazard
During transportation always strap the machine
securely, otherwise it can cause injury.
►
Use the front and rear towing attachment points
to secure the machine.
Secure transport
Secure the machine for all transportation.
♦
Use the front and rear towing attachment points
to secure the machine.
♦
The transmitter must be placed under the rear
hood in transportation mode.
Installation
Fuel
Filling
WARNING Fuel hazard
The fuel is extremely flammable and fuel fumes can
explode when ignited, causing serious injury or death.
►
Protect your skin from contact with the fuel.
►
Never remove the filler cap or fill the fuel tank
when the machine is hot.
►
Never smoke when filling the fuel tank or when
working with the machine or servicing it.
►
Avoid spilling fuel and wipe off any fuel spilled on
the machine.
Filling procedure
1. Stop the engine and let it cool down before filling
the tank.
2. Release the filler cap slowly to let any pressure
escape.
3. Fill the fuel tank to the lower edge of the filler
pipe.
4. Never overfill the tank. Due to the movement of
the fuel within the tank, it is possible to have fuel
at a higher level than the tank cap, which can
lead to a spillage of fuel if the tank cap is opened.
This can be avoided by only opening the tank
cap when the machine is tilted and the tank cap
is at the fuel tank's highest point.
Operation
WARNING Engine running hazard
Vibrations from the engine can cause material
changes, this can cause the machine to move and
cause injuries.
►
Never leave the machine with the engine running.
►
Ensure that only authorized personnel operate the
machine.
►
Never give the transmitter to anyone who is not
fully familiar with the machine, its operation and
safety directives.
WARNING Transmitter hazard
If the operator is not fully familiar with the control
system when operating the machine, this may lead
to sudden and unexpected movements of the
machine which can cause injuries.
►
Always study this safety and operating instructions
carefully before operating the machine.
►
Only trained personnel who are fully familiar with
the control system may operate the machine.
15
© 2013 Atlas Copco Construction Tools AB | No. 9800 1387 01 | 2013-07-01
Original instructions
Safety and operating instructions
LH 804
