5
PRODUCT APPLICATIONS
C
onstruCtion
The
Sanidyne
®
Prime Remote
Germicidal Ultraviolet Portable Area Sanitizer consists of:
•
STER-L-RAY
®
High Output Germicidal Ultraviolet Lamps:
Deliver ultraviolet energy at the specific wavelength of 254
nanometers (nm). This wavelength is highly effective against microbes including virus, bacteria, and mold spores. Germicidal
ultraviolet rays are harmful to eyes and skin; avoid exposure of direct or reflected germicidal ultraviolet rays without approved
ultraviolet blocking face shield and protective covering (such as gloves, long sleeves with no gaps between cuff and gloves).
•
Audible Exit Warning Alarm:
To alert area that the lamps will be powered on in one minute and thirty seconds after the start
button is pressed or to indicate intruder is in Operation Area.
•
Elapsed Time Indicator:
A non-resettable display of the operating hours. Useful for scheduling and recording maintenance
and lamp replacement.
•
Hand-Held Remote Controller:
Provides easy operation of
Sanidyne
®
Prime Remote
from a safe distance, displays lamp
operation, controls treatment times and alerts operator with an audible alarm if an intruder enters Operation Area.
• Keypad Controller:
Provides easy operation of
Sanidyne
®
Prime Remote
and allows the operator a period of time (one
minute and thirty seconds) to leave the Operation Area before treatment begins.
• Intruder Sensors:
Delay treatment if the Operation Area is inhabited. Additionally if sensors detect an intruder with less than
30 seconds left before lamps operate, the countdown time will automatically restore back to 30 seconds until area is cleared.
• Power Cord:
For 120v AC 50/60Hz single-phase standard household current, a NEMA 5-15, three-prong plug is provided for a
properly grounded outlet. 230v AC 50/60Hz models use a CEE 7/7 (Schuko type) plug. (Consult factory for other plug types).
•
Stainless Steel Lamp Guard Assembly:
Protects lamps from damage during normal operation.
• Stainless Steel Construction
: All electronics and wiring are housed in an enclosure constructed of stainless steel, providing
strength and durability in order to withstand most harsh environments.
• Sanidyne
®
Prime Remote
will operate between 120v 50/60Hz and 250v 50/60Hz.
P
rinCiPle
of
o
Peration
The
Sanidyne
®
Prime Remote
design provides germicidal UV disinfection for purifying air and exposed surfaces in
unoccupied
areas. High levels of UV-C wavelengths are lethal to infectious microorganisms. Ultraviolet disinfection dosage is a
function of time and intensity of the germicidal UV rays to which the air and surrounding surfaces are exposed.
NOTE:
The
Sanidyne
®
Prime Remote
should be used as a supplement to your facility’s cleaning and disinfection protocols,
not as a replacement. Follow your facility’s cleaning and disinfection protocols before using the
Sanidyne
®
Prime Remote
.
No special room preparation is required prior to treating a room or area with the
Sanidyne
®
Prime Remote
—
however, target
surfaces must be directly exposed to the UV rays. These rays will not penetrate materials like cloth, paper or ordinary glass,
therefore, it is important to remove items from the direct line of sight that would block or shield the rays from other surfaces. The
Sanidyne
®
Prime Remote
does not generate any harmful byproducts, nor does it leave any residual substances.
It is the user’s responsibility to determine and validate the suitability of the equipment for use in system
or process. No warranty or representation is made by the manufacturer with respect to suitability or performance of this
equipment or to the results that may be expected from its use.
Indoor Use Only – The equipment must be sheltered from exposure to the elements and extremes in
temperature. Temperature range: 40°F to 95°F. The user should periodically inspect, clean as necessary and confirm the
presence and good legibility of the Product safety labels. Contact the factory for replacement labels in the event that any of
the labeling is missing or illegible.
The UV Treatment Results achieved are subject to variations in application conditions, it is recommended
that culture tests be performed to confirm desired outcomes.
l
imitations
• Safety procedures
MUST
be implemented to prevent ultraviolet exposure of occupants to direct or reflected ultraviolet rays.
Exposure to germicidal ultraviolet rays will result in the irritation of the eyes and reddening of the skin.
•
Personal protection equipment is required when entering the irradiated space with the germicidal
lamp(s) operating. Personal protection equipment includes skin and eye protection such as
gloves, long sleeves with no gaps between cuff and gloves, and an ultraviolet blocking face
shield (included with the purchase of the
Sanidyne
®
Prime Remote
).
