3
SAFETY WARNINGS
• All personnel should be alerted to the potential hazards indicated by the product safety labeling on this unit.
•
The following conventions are used to indicate and classify precautions in this manual and on product safety labeling. Failure to
observe precautions could result in injury to people or damage to property.
This is the safety alert symbol. It is used to alert you to potential personal injury hazards.
Obey all safety messages that follow this symbol to avoid possible injury or death.
This symbol is used to identify the need to wear
protective gloves.
Caution indicates a
POTENTIALLY
hazardous situation, which, if not avoided,
MAY
result in minor or moderate injury.
Caution used without the safety alert symbol
indicates a potentially hazardous situation, which,
if not avoided, may result in property damage.
Warning indicates a
POTENTIALLY
hazardous situation, which, if not avoided,
COULD
result in death or serious injury.
This symbol is used to identify an
ULTRAVIOLET LIGHT
hazard.
This symbol is used to identify an
ELECTRICAL
SHOCK
or
ELECTROCUTION
hazard.
This symbol is used to identify the need to wear
approved ultraviolet blocking eyewear.
This symbol is used to identify the need to wear approved
ultraviolet blocking face shield.
This symbol is used to identify components which must
not be disposed of in trash
Danger indicates an
IMMINENTLY
hazardous situation, which, if not avoided,
WILL
result in death or serious injury.
SAFETY INSTRUCTIONS
To guard against injury, basic safety precautions should be observed, including the following:
1.
Read and follow
ALL
safety instructions.
2.
Avoid exposure to direct or reflected germicidal ultraviolet rays. Germicidal
ultraviolet rays are
harmful
to the eyes and skin.
3. Intended for indoor use only.
4. Do not alter design or construction.
5. Do not use this sanitizer for other than its intended purpose, as described in this manual.
6. Do not use this sanitizer in occupied areas. The supplied “
DANGER – DO NOT ENTER…
” sign(s)
MUST
be clearly
displayed to warn against entering the area during the disinfection cycle without proper personal protection equipment.
7.
Germicidal ultraviolet rays may break down plastic, rubber or other non-metallic materials, with
inadequate resistance to ultraviolet. Shield all plastic, rubber or other non-metallic parts which may be exposed to direct or
reflected germicidal ultraviolet rays.
8. Do not remove any labels.
9.
Do not operate without proper electrical ground.
10.
Do not operate the sanitizer if the power cord and/or plug are damaged, or if any other damage to the sanitizer is
visible or suspected.
11.
Utility power supplied to the sanitizer,
MUST
match power requirements listed on the sanitizer label.
12.
Always disconnect power to the fixture before performing any service or maintenance
.
13.
Read and follow all notices and warnings on the sanitizer.
14.
SAVE THESE INSTRUCTIONS.
CAUTION
It is the user’s responsibility to determine and validate the suitability of this equipment for use in the user’s system or
process. No warranty or representation is made by the manufacturer with respect to suitability or performance of this
equipment or to the results that may be expected from its use. The user should periodically inspect, clean as necessary and
confirm the presence and good legibility of the product safety labels. Contact the factory for replacement labels in the event
that any of the labels are missing or illegible.
