Chapter 2. Hardware Setup
6
Rear View
No.
Component
Description
1
grounding terminal
The grounding wire connects here.
2
power jack
The power adapter cable plugs in here.
3
HDMI output port
section
The cables from your HDMI display devices plug into
these ports.
4
HDMI input port
The cable from your HDMI source device plugs in here.
5
EDID mode switch
Turn this switch to select the EDID mode (0~7). See
“EDID Mode Selection” on page 10.
6
firmware upgrade
port
This port is reserved for ATEN Technical Support. If you
would like to do a firmware upgrade yourself, please
contact your dealer.
7
RS-232 serial port
This is the serial remote port for output source selection
and high-end system control, as well as for upgrading the
device firmware.
1
2
3
4
5
6
7
