VS0110HA User Manual
3
Planning the Installation
Required Equipment
1 source device equipped with an HDMI Type-A connector
1 ~ 10 display devices equipped with an HDMI Type-A connector
1 HDMI cable to connect the VS0110HA to source device
1 ~ 10 HDMI cables to connect the VS0110HA to the display devices
Note:
You can connect a DVI source to the VS0110HA via a DVI to HDMI
adapter.
ATEN strongly recommends that you use high-quality HDMI cables of
appropriate length since this will affect the quality of the audio and video
output. Contact your dealer to purchase the correct table sets.
Optional Equipment
To control the VS0110HA using RS-232 serial commands, prepare the
following equipment:
1 RS-232 controller, e.g. a PC
1 serial cable with a 9-pin male connector
