Chapter 2. Hardware Setup
8
Installation
Follow the steps below to safely connect the required devices to the
VS0110HA.
1. Use a grounding wire to ground the unit by connecting one end of the wire
to the grounding terminal, and the other to a suitable grounded object.
Note:
Do not omit this step. Proper grounding helps prevent damage to the
unit from surges or static electricity.
2. Use an HDMI cable to connect your source device to the HDMI Input Port
on the VS0110HA.
3. Use HDMI cables to connect up to 10 display devices to the HDMI Output
Ports on the VS0110HA.
4. (Optional) To configure the VS0110HA settings through the RS-232 port,
connect a hardware/software controller to the VS0110HA.
5. Plug the provided power adapter into an appropriate AC power source, and
then plug the power adapter cable into the Power Jack on the VS0110HA.
1. Please review the safety information regarding the placement of
this device in
2. Do not power on the VS0110HA and the connected devices until
all the necessary hardware is connected.
4
5
2
3
1
0
1
2 3
4
5
6
7
