9
Chapter 3
Operation
Overview
You can operate the VS0110HA using the panel pushbuttons or an RS-232
serial controller. The availability of actions with the two methods is
summarized in the table below.
Switching On/Off the Port
You can switch on/off one or all output ports using the RS-232 command (see
Action
Operation Methods
Rotary Switch
Serial Controller
Switch Port
Switch on/off one or all output port
EDID
Select an EDID Mode
Select the ATEN default EDID
configuration
Baud Rate
Set the baud rate
Read Information
Read and display information from the
VS0110HA
Reset
Reset the VS0110HA to default factory
settings
