ATEN VS0110HA, Руководство пользователя

Страница: 22 / 31

Chapter 3. Operation
12
RS-232 Commands
Task RS-232 Command Description
Switch Port
Switch output port(s)
on
sw o<output_number>
on
Switch on one or all output ports. For
example, to turn output port 02, type
sw o02 on
output_number: 01-10, * (all output
ports)
Switch output port(s)
off
sw o<output_number>
off
Switch off one or all output ports. For
example, to turn off all output ports,
type: sw o* off
output_number: 01-10, * (all output
ports)
EDID
Implement the
display’s EDID
edid portyy Implement the EDID of the display
connected to Port yy, and pass it to
the video source.
yy: 01-10
Implement auto EDID edid auto Implement the EDID of all connected
displays. The VS0110HA uses the
best resolution for all displays.
Implement ATEN
default EDID
edid defaultyy Implements the specified ATEN
default EDID configuration.
yy: 00-09, default is 00 (see ATEN
Default EDID
, page 11)
Baud Rate Setting
Set up the baud rate baud
<baud_rate_value>
For example, to set the baud rate to
9600, type: baud 9600
baud_rate_value: 9600, 19200
(default), 38400, 115200
Read Information
Read (display) the
VS0110HA’s settings read Reads and displays information from
the VS0110HA.
Reset