ATCOM AT-323 IP Net Phone User Manual (V Released 1.25)
Shenzhen ATCOM Co., Ltd.
14
Fig 3.2 Network Setting Page
●
iptype: Set how IP phone gets relevant network parameters by
selecting corresponding item from drop down list.
static ip: Select this item to authorize users set IP address,
subnet mask and router IP address of IP phone manually.
dhcp: Select this item to enable DHCP mode. With this system, your
LAN or router automatically assigns all the required network
parameters to any device connected to it when the device log on.
ATCOM IP phone is shipped from the factory with DHCP on. So, if your
LAN or router is configured to use DHCP addressing, the IP phone
’
s
LAN parameters will automatically be configured as soon as it is
connected to the LAN or router and powered up.
pppoe
:
Those ADSL and Cable Modem users please select this item for
it is a protocol especially designed for them. With this system,
ADSL ISP automatically assigns all the required IP parameters to
any device connected to it when the device log on.
modem
:
If the IP phone used with modem, please select this item to
get relevant network parameters auto. Then please fill ID and pin