ATCOM AT-323 IP Net Phone User Manual (V Released 1.25)
Shenzhen ATCOM Co., Ltd.
28
Fig 3.7 Setting Page using ordinary pin with Debug set as 0 [disable]
●
Update: Click this button to save the configuration and restart the
phone. Once the phone restarts successfully, the new configuration
is effective.
Note
After entering set page, if
Update
button is not clicked within 5 seconds, then
when you click it again, the index page asking for pin will pop up again. Then
please input the password again to enter the set page and then click
Update
button to confirm the modification.
Phone Book: Click this button to open the speed dial settings page. Please
refer to Fig 3.7. In this page, you can set and save the speed dial number
by typing the name into the Name field and then entering the corresponding
number following the name. For example, input Jack in Name field following
001, and then input 5989426454 into Phone number field. Then Jack
’
s
number 5989426454 is saved in phone book. Then please click Save/Back
button. In normal state, you can use speed dial to call numbers saved in
phone book.
Note
With H323 protocol used, if the phone dose not login Gatekeeper or Gateway;
or with SIP protocol used, the phone dose not login Server Proxy, you can
save IP address of other phone into phone number field. Please use
“*”instead of “.”. For example, save IP address 192.168.1.221, please input
192*168*1*221.