ATCOM AT-323 IP Net Phone User Manual (V Released 1.25)
Shenzhen ATCOM Co., Ltd.
30
to HTTP set chapter to learn how to set IP phone.
Telnet Configuration
●
On the PC connecting with the phone or on the same segment with
the phone, choose Start>Run, and then type telnet 192.168.1.100
into Run field in popuping Run dialog. Or input telnet
192.168.1.100 in the DOS window. Then the following information
will be displayed.
ATCOM V1.25 settings
Password :
Then please type password. With debug is set as 0[disable], if type
ordinary password (default one is 1234), after Retun, you will see
：
Password : ****
P:\>
If you type super password, then you will see:
Password : ********
P:\>
Above information indicates that IP phone is under setting mode, Then you
can set the ATCOM IP phone by using the telnet commands.
ATCOM Telnet Commands Explanation
ATCOM Telnet Commands
Command Function
?
Supply command name and parameters
get
Display basic parameters of the ATCOM IP phone
set
Set parameters of the ATCOM IP phone
store
Save current settings to designated position
load
Load designated settings to current position
exit
Exit from the setting mode without saving the configuration
write
Exit with saving all configurations and restart ATCOM
