ATCOM AT-323 IP Net Phone User Manual (V Released 1.25)
Shenzhen ATCOM Co., Ltd.
7
Size
:
198 x 176 x 60 mm (L x W x H)
Installation:
1
.
Connect handset to base: insert handset cord into handset cord jack
at the left side of the base.
2
.
Connect IP phone to Internet: plug the RJ-45 Ethernet cable into the
Ethernet Jack. Plug the other end of the cable into HUB.
3
.
Power on IP phone: p
lug the power cord adapter into the Power Jack. Then
plug the other end of the power cord adapter into the appropriate wall
outlet.
Configuration
Four different ways can be used to configure ATCOM IP phone: phone
keypad set; web browser, Telnet commands and PalmTool configuration on
computer.
Phone Keypad se
●
Function Keys Introduction: While using keypad and LCD to configure
the setting of IP phone, following keys will be used:
Keys Function Keys
Function
LocaIP
Enter change mode
Speaker
Enter submenu; confirm change
Vol
+
Turn over menu
backward
Vol -
Turn over menu forward; move
cursor back in change mode
Keypads
Modify values
Redial
Exit current menu; exit change
mode
●
Configuration operation: We tack enabling eTalk prepaid card and
setting the ID and pin as an example to explain how to change