ATCOM AT-323 IP Net Phone User Manual (V Released 1.25)
Shenzhen ATCOM Co., Ltd.
46
Usage: ping IP address of other NAT device
Relevant usage: In telnet window, input ping xx.xxx.xx.xx
（
an IP
address
）
and return, then the result will be displayed. If the
address is effective,
“
ping OK
”
will be seen; if the address is
ineffective, nothing will be seen. Fox example:
P:\>
ping 203.93.9.57
P:\>
ping OK
P:\>
ping 27.56.120.56
P:\>
Note
Usually, the echo time of ping command is no more than 1 second. So if the
result is not displayed in 5 seconds, ping command is fail.
ftp
命令
Syntax description: ftp value
Usage: the system connects to the FTP server auto to get the
corresponding file and deal with it.
Relevant usage: ftp X
X ranged from 0 through 2:
X-0: Connect to FTP Server to get the file of updating program and
save it to the SDRAM of the phone. Then the file can be read by
PalmTool. This operation aims at testing.
X-1: Connect to FTP Server to get the file of updating program and
update program Flash. This operation aims at updating program.
X-2: Connect to FTP Server to get the file of updating dial rules
and update program Flash. This operation aims at updating dial rule.
Note
When you use ftp 0 and ftp 1 commands, if the file get from FTP server is too
large or the net speed is too slow, then the process will not be seen in telnet
window. Please be patient. Using ftp command in telnet to get file spends almost
same minutes as getting file using phone. So if nothing is displayed after too long
time, it means that ftp is fail.
Note
All the Telnet commands of ATCOM IP phone should be written in low case and
the password is case sensitive.