7
STEP 2
STEP 1
DRILL FOR LOWER SCREW BRACKET
(HOLE Nº1)
PLACE LOWER SCREW IN OVAL HOLE
DRILL FOR TOP SCREW
L
R
L
R
Fig. 3a
Fig. 3b
CONTROL OPTIONS
The Merida convector is designed to be used in conjunction with the Smart Gateway system and App,
providing total control of your heating system from anywhere in the world via the internet. The App is available
for both Android and iOS devices and offers the ultimate in control and energy monitoring.
Search for “Tevolve” on the either the Google Play Store or the Apple App Store.
Scan this QR code to access to the download.
It is also possible to programme each convector individually without the App by using the built
in controls and screen. This may be convenient for single heaters however we recommend
the Gateway to control multiple heaters.
Finally the heaters can be used in Manual mode or Easy mode which bypasses any programming and
provides simple On/Off operation.
2. Attach the mounting bracket to the wall using the screws provided, screw through the lower horizontally
slotted holes and mark through the upper vertically slotted holes for the top fixing screws. See Figure
3b. Drill and plug the wall for these screws.
Using this method the heater will be mounted on the wall with 200mm between the floor and the bottom
of the heater.
3. When the mounting bracket is fixed to the wall mount the heater by first attaching the lower bracket and
then the top ensuring the clip clicks into the heater, once clipped in, attach the locking screw. See Fig 4.
MODEL
L (mm)
R (mm)
Merida 500
130 + d
130 + d
Merida 750
130 + d
130 + d
Merida 1000
72,5 + d
72,5 + d
Merida 1500
180 + d
150 + d
Merida 2000
260 + d
260 + d
Table 1.
d
: distance between edge of the heater and wall
(minimum 150mm).
NOTE: The bracket for the 1500w heater is not in the
centre of the heater, ensure proper measurement prior
to mounting.
Fig. 4
