11
22
.5°C
1h 35m
BOOST
MODE
set temp
1h
OK
BOOST
Set time:
21
.5°C
Wed. 11:00
Set point:
COMFORT
Next Program ON Time
Starts at:Tue. 20:00
Set point:
21
.5°C
Wed. 11:00
Brightness Level
1 2 3 4
ON
Level
OFF
1 2 3
OFF
Level
OK
DISPLAY SETTINGS
Backlight Time
5 10 30 always
DISPLAY SETTINGS
OK
Eco Display
OFF
ON
DISPLAY SETTINGS
OK
Beep
OFF
ON
DISPLAY SETTINGS
OK
OK
CONFIG
COMFORT
ECO
ANTI-FROST
PROGRAM
SETTINGS
COMFORT
TIME
Settings
DISPLAY
Settings
ADVANCED
Settings
OK
SETTINGS
Brightness Level
Backlight Time
Eco Display
Beep
DISPLAY SETTINGS
OK
To make sure your program is running Press
the OK/MODE button until
is shown at the
bottom of the screen.
The screen will change between the operation
screen and the next time of operation.
At any time, the temperature can be changed with
the +/- buttons.
To Adjust the brightness of
the screen, select Brightness
level and press OK.
The ON levels are between
1=25%, 2=50%, 3=75% &
4=100%.
The OFF levels are Off,
1=3%, 2=10% and 3=20%.
Chose the level required
and Press OK.
To Set the time the screen
stays on for after the
last button press, select
Backlight Time from the
DISPLAY menu and chose
how many seconds are
required. The factory default
is 10s (Always is used for
Demonstration and will
never turn off)
The Merida convector
features a “responsible
consumption” Eco Display
mode, this mode will show
a coloured bar across the
bottom of the screen to
encourage the user to set an
economical temperature.
This feature is turned on
and off in the ECO DISPLAY
menu.
To de-activate the beep
when each key is pressed
enter the BEEP menu and
select either On or Off.
BOOST
DISPLAY SETTINGS
The first press of any button will wake up the convector any
further button presses will activate the function required.
The Merida convector has a built in Boost mode
to allow the user to temporarily over-ride the
current operating mode. The
Boost button (short press of
CONFIG) will immediately
turn the heater on for 1 hour
at 21°C (or the previous
boost setting) as soon as the
button is pressed.
To adjust the temperature of the boost period, use
the +/- buttons.
To adjust the duration, press
the CONFIG button, the
boost time setting screen will
be displayed; adjust the time
required between 1 hour and
24 hours.
To return to the boost screen press CONFIG.
To return to normal operation and cancel from the
Boost mode Press the OK button.
The Display menu on the Merida convector
allows the user to customise how the convector
looks whilst the screen is on and off, it also allows
the button sound to be controlled.
To open the DISPLAY menu, press and
hold CONFIG until the menu appears, select
SETTINGS and press OK, finally select DISPLAY
and press OK.
