ATC MER1000 Скачать руководство пользователя страница 3

3

IMPORTANT INFORMATION

• 

This  appliance  can  be  used  by  children  aged  8  years  and  above  and  persons  with 

reduced  physical,  sensory  or  mental  abilities  or  lack  of  experience  and  knowledge,  if 

they have been given supervision or appropriate training regarding the use of the device 

in a safe way and they understand the dangers involved.

• 

Children  should  not play  with the appliance.  Cleaning  and maintenance  should  not be 

performed by unsupervised children.

• 

Children  under  3  years  should  be  kept  out  of  reach  of  the  appliance  unless  they  are 

constantly supervised.

• 

Children between age 3 and younger than 8 years old should only turn on / off the device 

whenever it has been placed or installed at its normal operating position provided they 

are supervised or have received instructions concerning use of the appliance safely and 

understand the risks that the device has. Children from 3 years and under 8 years old 

should not plug in, regulate, clean the appliance or perform maintenance.

• 

Warning: Some parts of this product can become hot and cause burns. Pay particular 

attention when children and vulnerable people are present.

• 

Heaters must be installed correctly following the specific requirements of the Installation 

Instructions section below.

Warning: in order to avoid over heating the unit, do not cover the heaters.

This symbol “DO NOT COVER”, is placed on the convector as a reminder 

to the user. 

ATTENTION:

• 

The heaters must not be covered by clothing, containers or any other objects that may 

block the air ventilation.

VERY IMPORTANT:

The 

OFF

  indicator  shown  on  the  heater’s  control  panel  does  not  mean  disconnection 

of  the  heater  from  the  power  supply  and  should  be  understood  as  a  standby  condition. 

To  ensure  the  heater  is  completely  off  and  without  access  to  the  power  supply,  it  is 

recommended to disconnect it from the power supply by removing the fuse from the spur 

outlet. Alternatively, change the mechanical switch on the side of the heater to 

OFF

.

• 

The  unit  must  be  placed  away  from  flammable  objects  and  children  must  not  be  left 

unattended when the convector is heating.

• 

The heater should not be located underneath any electrical connection.

• 

The  electric  supply  line  should  be  protected  with  a  high  sensitivity  differential  device 

(RCBO).

• 

Do not use the heater to dry clothes.

• 

Heaters must not be installed in places where there are risks of splashes such as next to 

bathtubs, sinks, etc.

• 

If the power cord is damaged, it must be changed by the manufacturer, its after-sales 

service or persons qualified to do so, to avoid possible danger

• 

Anyone who is in the bathtub or shower should not have access to the switches or other 

power operation devices. Always keep at least 0.6m (UK) or 3.0m (Ireland) between the 

radiator and the bath or shower.

 

(UK: Outside zone 2, Ireland: Outside zone 3)

• 

The  radiator  must  be  installed  so  that  around  the  radiator  there  is  sufficient  space  for 

proper circulation of hot air, with a minimum distance of 150 mm to curtains, furniture, etc

Содержание MER1000





















Отзывы: