ATC MER1000 Скачать руководство пользователя страница 20

20

MAINTENANCE AND CARE

Merida convector heaters require very little maintenance.

The surfaces of the convector must not be cleaned with an abrasive product or those containing granular substances.

We recommend regular cleaning with pH neutral products.

In order to clean the convector, it is recommended that the electric power is switched off. 

IMPORTANT

Failure to keep the Merida Convector clean may result in dust becoming burnt and depositing on the wall above 

the heater in the form of dark streaks or patches. This type of marking is expressly due to failure to keep the 

heater and surrounding area clean. ATC take no responsibility for any such damage caused

GUARANTEE

Your appliance is guaranteed for 2 years from the date of purchase – during this period we will repair or exchange, at 

our discretion, any faulty or defective parts providing the appliance has been used in accordance with the operating & 

installation instructions and has not been misused or mistreated in any way.

Any un-authorised repair or attempted repair will invalidate the guarantee. You may be asked to return the product to 

our workshop for inspection to establish whether the fault is covered under the guarantee. Transportation charges are 

not covered under the guarantee.

The guarantee is valid in the UK and Ireland only.

This guarantee is additional to your statutory rights.

In the unlikely event of a problem with your appliance please contact your supplier.

CORRECT DISPOSAL OF THIS PRODUCT

(

W

aste 

E

lectrical & 

E

lectronic 

E

quipment)

(Applicable in the European Union and other European countries with separate collection 

systems)

This marking shown on the product or its literature, indicates that it should not be disposed of 
with other household wastes at the end of its working life.
To  prevent  possible  harm  to  the  environment  or  human  health  from  uncontrolled  waste 
disposal, please separate this from other types of wastes and recycle it responsibly to promote 
the sustainable reuse of material resources.

Household users should contact either the retailer where they purchased this product, or their local government office, 

for details of where and how they can take this item for environmentally safe recycling.

Business users should contact their supplier and check the terms and conditions of the purchase contract. This product 

should not be mixed with other commercial wastes for disposal.

Head Office & Energy Showrooms

:

ATC House, Broomhill Drive,

Tallaght, D24 EF99

Ireland.

Tel: 353 (1) 467 8301

UK Tel: 0044 (0)203 5649164

Email: [email protected]

Содержание MER1000





















Отзывы: