Operating instructions AQUAMAX
®
PRO G
ATB WATER GmbH, Südstraße 2, D-32457 Porta Westfalica, www.atbwater.com /
Art.-No.: 9060 0272 / Status: 24 February 2021 / Page 5 from 36
Installation tasks are to be carried out by electrically skilled persons only. With work on the
equipment the mains plug must be disconnected. A separation or extension of the leads is not
permitted. The electrical connection data is to be taken from the specification plate on the
equipment.
Do not operate any equipment which has a damaged connection/connecting lead or plug, which
exhibits a malfunction, has been dropped or is damaged in any way.
With all maintenance and repair tasks the plant is to be disconnected from the mains. The
AQUAMAX
®
can be removed easily from the pit. If the plant has to be entered then this
(fundamentally) may take place only with the presence of a second person. Particular care is to be
taken. The applicable accident prevention regulations and the rules of technology are to be
observed.
The AQUAMAX
®
submersible aerator feeds the required air to the wastewater through a rapidly
rotating propeller. Never operate in the vicinity of the aerator as long as the AQUAMAX
®
is
connected to the mains supply. Danger of injury!
Only with the use of original spare parts or with spare parts authorised by ATB can correct function
be assured. Before commissioning all points of the operating instructions are to be checked again.
Keep these instructions available at all times!
Explanation of the warning notices used:
ATTENTION!
Hazard due to electrical voltage!
Rotating parts. Danger of crushing or ingestion in the area of the submersible aerator!