Operating instructions AQUAMAX
®
PRO G
ATB WATER GmbH, Südstraße 2, D-32457 Porta Westfalica, www.atbwater.com /
Art.-No.: 9060 0272 / Status: 24 February 2021 / Page 4 from 36
Dear customer,
at this point we would like to thank you for the trust which you have shown in us by the purchase of
this product.
On the following pages you will find everything necessary about the installation, operation and
maintenance requirements of your AQUAMAX
®
small wastewater treatment plant.
Please note that the careful installation of the wastewater treatment plant and the later
maintenance are very important for a good treatment performance.
Regular maintenance is laid down by the authorities. Through the conclusion of a maintenance
contract the plant and its biological discharge values are monitored continuously.
General and safety information
With the AQUAMAX
®
one is concerned with a technical system which, together with a multi-
chamber, can be employed as small wastewater treatment plant for the aerobic biological
treatment of domestic and comparable wastewater of up to 8 m³/d from individual or several
buildings, collected using a separate system. Dimensioning, configuration and operation are to
take place in accordance with DIN EN 12566-3 and the approval of the German Institute for
Structural engineering (DIBt)!
With employment according to regulations no hazards whatsoever emanate from the plant. If the
AQUAMAX
®
is used for other employment purposes without the express approval of ATB WATER
GmbH and/or if the following safety information is disregard, this can lead to the hazarding or injury
of persons and to malfunctions of or defects in the plant. In this case every liability is excluded.
Modifications to the plant or unauthorised conversions are not permitted.
The AQUAMAX
®
and accessories are not intended to be used by persons (including children) with
limited physical, sensory or mental capabilities or without experience and/or knowledge, unless
they are supervised by a person responsible for their safety or receive from him/her instruction on
how to use the AQUAMAX
®
and accessories. Children are to be supervised in order that they do
not play with these.
Before use the AQUAMAX
®
is to be installed correctly and in agreement with the installation
instruction. Installation instructions, operation and maintenance instructions are to be read careful
before assembly and commissioning and the instructions contained therein must be followed
implicitly.
With assembly and installation, commissioning and operation as well as, if necessary,
decommissioning, the customary national standard specifications and provisions are to be
observed. All tasks may be carried out by trained and qualified specialists with an appropriate
certificate of qualification only. The operator of the plant is to be instructed by the service
technician.
With the connection of the control system the national applicable provisions as well as the details
on the specification plate are to be observed (mains voltage, frequency etc.). The equipment is to
be operated only on network configurations which include a protective earth (PE) conductor.
Attention is to be paid to correct phase connection (even with ready-to-plug
configurations)!
Connection to the mains must be by means of separate fusing and earth leakage
circuit breaker (ELCB). Before commissioning the faultless function of the electrical safety
measures must be checked!