Operating instructions AQUAMAX
®
PRO G
ATB WATER GmbH, Südstraße 2, D-32457 Porta Westfalica, www.atbwater.com /
Art.-No.: 9060 0272 / Status: 24 February 2021 / Page 28 from 36
Terminal box
Terminal configuration:
4 x L, 4 x N, 8 x PE
power supply 110...250V, 50...60Hz
Outlets
A1, N / A2, N
Aerator 1 / 2 (Mixer for XLAM) Phase / Neutral
F1, N / F2, N
Feed pump 1 / 2
Phase / Neutral
C1, N / C2, N
Clear water pump 1 / 2
Phase / Neutral
SL, N
Sludgepump
Phase / Neutral
UV, N
UV-lamp
Phase / Neutral
P, N
Precipitant dosingpump
Phase / Neutral
Inputs 12 V DC
S1 / G
Float switch SW1
Phase / Ground
S2 / G
Float switch SW2
Phase / Ground
S3 / G
Float switch SW3
Phase / Ground
S4 / G
Float switch SW4
Phase / Ground
US / G
UV-sensor
Phase / Ground
PL / G
Precipitant level control
Phase / Ground
Inputs 4-20 mA, max. 24V
A+, A- /B+, B-
Analog Inputs
Plus / Minus
CAN-Bus for networking of multiple control units
2 x 24V, GND, H, L
Potential free contacts max. 250V AC, 5A
NO1, CO1, NC1
Alert contact 1
potential free
NO2, CO2, NC2
Alert contact 2
potential free
Aggregate no.
no. Aggregate
sludgepump (SL) F1
F2 UV + dosingpump (UV+P)
clearwaterpump 1 (C1) F3
F4 clearwaterpump 2 (C2)
feedpump 1 (F1) F5
F6 feedpump 2 (F2)
aerator 1 (A1) F7
F8 aerator 2 (A2)
Assignment of microfuses T6.3A (see label in the terminal cover)