11
Registration and deregistration
Deregister handsets
You may need to deregister your handsets if:
You have 12 registered handsets and need to replace a handset.
-OR-
You wish to change the designated handset number of your
registered handsets.
You must first deregister ALL handsets, and then register each
handset you wish to use again, one at a time.
Please read carefully through all the instructions on this page
before beginning the deregistration process.
Deregister all handsets from the telephone base
In addition to the cordless handsets, this operation will also
deregister all cordless headsets and speakerphones registered to
your telephone base.
Make sure that all handsets are out of the telephone base and
chargers before you begin deregistration.
Press and hold
/HANDSET LOCATOR
on the telephone
base for about 10 seconds. The telephone base screen shows
Registering... Please wait
for five seconds, then it shows
Deregister all devices?
. Release
/HANDSET LOCATOR
.
Quickly press
/HANDSET LOCATOR
again or press
YES
. You
must press
/HANDSET LOCATOR
or
YES
within five seconds. If
the telephone base returns to idle screen, start again with Step 1.
The telephone base shows
Deregistered all devices
when the
registration completes. It takes up to 10 seconds to complete
the deregistration process. Before registering the handset again,
wait for the cordless handset screen to display
To register, see
user manual
.
To register the handset(s) to the telephone base again, follow
the registration instructions on pages 9-10.
NOTES:
If the deregistration process fails, you may need to reset the system and try
again. To reset, unplug the power from the telephone base and plug it back in.
You cannot deregister the handsets if any other system handset is in use.
Even if the battery is depleted, you can still deregister the handsets by following
the steps. After the handset is charged for at least 10 minutes, the screen shows
To register, see user manual
.
•
•
1.
2.
3.
4.
5.
•
•
•
