Introduction
1-6
Issue 2 April 1996
NOTE:
This guide refers to hotspots in Fault Management, not DynaText
. The
Fault Management screens and windows that display when you double
click on the camera icon in this guide do not have functioning hotspots.
However, you can try out the hotspots when you return to the Fault
Management application.
Fault Management hotspots open up a screen at the next hardware layer.
For example:
The port and individual external device layers do not have hotspots because
they are the last layers.
Each window that a hotspot opens is specific to the hotspot itself. For example, if
you click on the Cabinet 1 icon in the Switch View, the system opens a window
containing only Cabinet 1 data, as shown in the following figure:
If you are at this
layer …
And you click on this
hotspot …
Then this layer
displays…
Switch
Cabinet icon
Cabinet
External devices icon
External Devices
Cabinet
Circuit pack code
Circuit pack
Circuit pack
Port number
Port
External Devices
External device icon
Individual
External Device
Содержание OneVision DEFINITY G3 Fault Management and integration
