AT&T OneVision DEFINITY G3 Fault Management and integration Скачать руководство пользователя

Страница: 100 / 153

The Configuration Manager

6-4

Issue 2 April 1996

Circuit Pack Inventory Report

The Circuit Pack Inventory report displays information about the circuit packs
currently on the PBX. The data is sorted in the following sequence:

1. Code

2. Suffix

Table 6-3.

Field Descriptions for the Hardware/Software Information Report

Field

Description

Hardware
Configuration from
the Proxy Agent

The PBX’s hardware configuration, taken from
the Proxy Agent.

This value and the Hardware Configuration
field value should be the same.

Hardware
Configuration from
the PBX

The PBX’s hardware configuration, taken from
the PBX.

NOTE:

An error message displays if the switch
type in this field does not match the one
in the previous field. This message
indicates that the PBX is administered
as a different configuration than the
hardware really is.

Fault Management’s configuration
validation is concerned with any
difference in the r, i, s, or vs (as in
"G3rV3" or "G3vsV3).

Active SPE

The name of the switch processor element
(SPE) that is currently active.

Software Vintage

The release of PBX software running on the
active SPE.

If the value in this field is “not available,”
either there is no backup processor or the
backup processor is not operational.

Update Identifier

The ID for the update patch.

Update State

The state of the update, as reported by the
PBX.

Application Software
Vintage

The current version of the Fault Management
software

Содержание OneVision DEFINITY G3 Fault Management and integration


























































































































































Результаты поиска

Содержание OneVision DEFINITY G3 Fault Management and integration

Отзывы:

Похожие инструкции для OneVision DEFINITY G3 Fault Management and integration

Бренды по названию

Популярные бренды

AT&T OneVision DEFINITY G3 Fault Management and integration, Руководство пользователя

Результаты поиска

Содержание OneVision DEFINITY G3 Fault Management and integration

Отзывы:

Похожие инструкции для OneVision DEFINITY G3 Fault Management and integration

Бренды по названию

Популярные бренды