AT&T OneVision DEFINITY G3 Fault Management and integration, Руководство пользователя

Страница: 108 / 153

The Configuration Manager
6-12 Issue 2 April 1996
How to Close Configuration Reports
To close a report, click on Close.
Cabinet Displays
The configuration manager displays a graphic depiction of the circuit packs
within the cabinet.
When you select a filter from the Configuration menu, Fault Management
highlights the circuit packs that meet the filter criteria.
You can:
■
Identify how the circuit packs are configured
■
Clear filter highlighting
Circuit Pack Filters
Fault Management offers several predefined configuration filters. When you
select the filter type, the system:
■
Highlights those circuit packs that meet the filter criteria
■
Displays a circuit pack report
This feature is available only at the cabinet level, where you can see the graphic
depiction of the circuit packs within the cabinet.
The predefined circuit pack filters are:
■
Unassigned Ports
■
No Assigned Ports
■
No Available Ports
■
TTI Ports
■
Type Mismatch
■
Control Circuit Packs
■
Major Alarms
■
Minor Alarms
■
Warning Alarms
For a description of these filters, see Table 4-7.
The following figure shows a cabinet that highlights circuit packs with
Unassigned Ports. In the lower right portion of this window, a message identifies