ATAGO VISCO, Быстрое руководство

Страница: 29 / 50

24
4 Cleaning
4-1 Main Unit
m
•
Disconnect all the cables and power OFF the instrument.
•
Place the protective cap on the shaft holder after use.
•
Subjecting the shaft holder to sudden shock or excessive force may result in
damage and malfunction. Always rotate the instrument
’
s legs and keep the
instrument in an upright position, except when storing it in its protective
case.
Gently wipe off the instrument using the cleaning methods outlined below:
•
A soft, dry cloth, such as a lens or microfiber cloth.
•
A cloth moistened with mild soap or ethyl alcohol.
4-2 Spindles
m
•
Wash the spindles after every use.
•
When using highly volatile or flammable solvents, be sure to wear appropriate
protective clothing, such as gloves, masks, etc.
•
Wash the instrument with lukewarm water.
•
Use mild soap, ethyl alcohol, or acetone when necessary.
5 Error Messages
HHH ： [Viscosity] This error message will appear If the torque value exceeds 100%.
(Refer to the "Abnormal Measurement Values"
C p.39)
[Temperature] This error message will appear if the temperature exceeds
105.0
˚
C (221.0
˚
F).
LLL ： [Temperature] This error message will appear if the temperature is below -5.0
˚
C
(27.0
˚
F).
It will also appear if the temperature sensor is not attached.