manualshive.com logo in svg

Asus Z8NH-D12, Руководство пользователя, Страница: 55 / 178

Поделиться
Скачать
Asus Z8NH-D12 Скачать руководство пользователя страница 55

ASUS Z8NH-D12 Series

2-37

11.  Auxiliary panel connector (20-pin AUX_PANEL1)

This connector is for additional front panel features including front panel 
SMB, locator LED and switch, chassis intrusion, and LAN LEDs.

1.  Front panel SMB (6-1 pin FPSMB)

 

These leads connect the front panel SMBus cable.

2.  LAN activity LED (2-pin LAN1_LED, LAN2_LED

) 

These leads are for Gigabit LAN activity LEDs on the front panel.

3.  Chassis intrusion (4-1 pin CHASSIS)

 

These leads are for the intrusion detection feature for chassis with 
intrusion sensor or microswitch. When you remove any chassis 
component, the sensor triggers and sends a high-level signal to these 
leads to record a chassis intrusion event. The default setting is short 
CASEOPEN and GND pin by jumper cap to disable the function.

4.  Locator LED (2-pin LOCATORLED1 and 2-pin LOCATORLED2)

 

These leads are for the locator LED1 and LED2 on the front panel. 
Connect the Locator LED cables to these 2-pin connector. The LEDs will 
light up when the Locator button is pressed. 

5.  Locator Button/Swich (2-pin LOCATORBTN)

 

These leads are for the locator button on the front panel. This button 
queries the state of the system locator.

Содержание Z8NH-D12



















































































































































































Отзывы:

Нет отзывов