manualshive.com logo in svg

Asus Z8NH-D12, Руководство пользователя, Страница: 53 / 178

Поделиться
Скачать
Asus Z8NH-D12 Скачать руководство пользователя страница 53

ASUS Z8NH-D12 Series

2-35

9.  Proprietary power connectors 

(20-pin PWR1, 20-pin PWR2, 4-pin PWR3)

These connectors are for Proprietary power supply plugs. The power supply 
plugs are designed to fit these connectors in only one orientation. Orient the 
connectors and push down firmly until they completely fit.
The 4-pin EZ_PLUG is designed for hard disk drives power supply. DO NOT 
connect other 4-pin power connectors of the power supply unit (PSU) to this 
connector. 

• 

Connect either one of the 20-pin power connectors to boot up the system.

• 

Use of a PSU with a higher power output is recommended when 
configuring a system with more power-consuming devices. The system 
may become unstable or may not boot up if the power is inadequate.

• 

USE THE PROPRIETARY POWER SUPPLY ONLY; otherwise you may 
damage the motherboard. Ensure that your PSU can provide at least the 
minimum power required by your system.

Содержание Z8NH-D12



















































































































































































Отзывы:

Нет отзывов