Astria.us.com
900704-00E
28
OPERATION
Continued
Program Operation
•
Touch the TIME/PROG Zone to activate or
deactivate Program Operation. Touching the
MODE Zone or pressing the MODE/SET But-
ton will also deactivate Program Operation.
When Program Operation is deactivated, the
transmitter will return to MANUAL OFF Mode.
•
Program Operation will cycle fi replace igni-
tion ON and OFF based on time settings (2
weekend periods and 2 weekday periods)
and thermostat settings. Press the MODE/SET
Button or wait for 15 seconds to advance to
each subsequent program setting.
•
To enter Program Setup, touch and hold the
TIME/PROG Zone for 5 seconds.
•
Program OFF LCD Displays:
• MODE Zone: OFF
• ROOM TEMP Zone: Measured temperature
is displayed
• SET TEMP Zone: Blank
• TIME/PROG Zone: Current day indicator,
current time, and Program status (P1- OFF
or P2-OFF) is displayed
• FLAME Zone: Blank
•
Program ON LCD Displays:
• MODE Zone: THERMO and either ON or OFF
is displayed
• ROOM TEMP Zone: Measured temperature
is displayed
• SET TEMP Zone: SET TEMP is displayed
• TIME/PROG Zone: Current day indicator,
current time, and Program status (P1- ON
or P2-ON) is displayed
• FLAME Zone:
If Thermostat is ON, A Flame Icon and fl ame
setting level number is displayed.
If Thermostat is OFF, display is blank.
Program Disable Feature
•
The Program Mode (described above) may
be disabled for applications where a program
operation is not allowed or undesirable. When
Program Mode is Disabled:
• The user will not be able to activate Program
Mode
• The user will not be able to enter Program
Setup or edit Program Mode settings.
•
The TIME/PROG zone will continue to display
the Clock and Day of week, but none of the
icons associated with Program Mode will be
displayed.
•
To disable or re-enable the Program Mode,
the transmitter must be in MANUAL OFF
Mode, then touch and hold the TIME/PROG
Zone and the DOWN Button simultaneously
for 10-seconds. The LCD screen will go blank
except either PROGRAM and OFF (OFF display
in MODE Zone) or PROGRAM and ON (ON
display in MODE Zone) will fl ash 3-times
(0.5-seconds OFF, 0.5-seconds ON) to indi-
cate the change has been made.
Flame-A (or Main) Adjustment
•
Transmits a fl ame height setting command
to the control module to adjust the Flame-A
height.
•
Available settings are 1-3 with a factory
default of 3. Refer to the THERMOSTAT
Mode section for additional details on fl ame
modulation in THERMOSTAT mode.
•
While in MANUAL ON, THERMOSTAT ON, or
PROGRAM ON modes, touch the FLAME Zone
to enter Flame-A Adjustment, then press the
UP or DOWN buttons to raise and lower the
fl ame; press the MODE/SET Button or wait for
15 seconds to accept the new setting.
•
LCD Display: When setting the Flame-A
height, the Flame-A icon, and Flame-A setting
number will fl ash in the FLAME Zone.
Child-Lock Operation
•
Child-Lock operation prevents any user input
to the transmitter. No mode of operation or
feature may be adjusted when Child-Lock is
activated. All automatic functions (thermo-
stat, program, etc.) will continue normally.
•
To activate or deactivate the Child-Lock
feature, press and hold the MODE/SET and
DOWN Buttons simultaneously for 5 seconds.
•
LCD Displays:
• When activated, the LOCK icon will appear in
the MODE Zone.
