Astria.us.com
900704-00E
23
Figure 42 - Platinum Bright Embers
Flat Front Burner
Ember Material
Figure 43 - Placement of Glowing Embers (shown with Platinum Bright Embers)
Glowing embers
Figure 41 - Ember Chunk Placement Blaze&Glow24 Series
Ember Chunk #1
Ember Chunk #2
Ember Chunk #3
Flat Front Burner
INSTALLATION
Continued
Place the ember chunks as shown in
Figure 41
on
Page 25
by placing the ember chunk with
the number "1" on the left, "2" in the center, and
"3" on the right. These numbers are embossed
on the back of each piece for identifi cation pur-
poses. Please note that Blaze&Glow18 burner
systems do not include ember chunks.
2. Two ember materials are supplied with this log
set. Platinum Bright Embers give a bright glow
appearing as hot coals. Should embers need
replacing, see
Parts
,
Page 45
.
Platinum Bright Ember placement.
Add em-
bers to front, fl at burner. Gently remove embers
from bag. Separate pieces of ember material
and place on surface of fl at burner just behind
horizontal ports as shown in
Figure 42
.
Glowing embers (rockwool) placement.
Place
glowing embers material on front fl at burner in
areas away from ports as shown in
Figure 43
.
3. Add volcanic stone and small decorative logs
around base of heater if desired.
DO NOT place
rock or additional logs on front burner or on
logs.
Placing any material on unit other than
ember material on front burner may result in
production of carbon monoxide or soot. Use
volcanic stone to hide wires from switch/log to
control valve. Place switch/log so the switch is
easy to access.
