Assa Abloy Effeff 319 Series, Инструкции по установке и монтажу

Страница: 38 / 92

38
EN
Information
Intended use
The multi-point lock 319 is suitable for installation in single or double-leaf tubular frame or solid-leaf doors
(backset 55 mm or greater) made of metal, plastic or wood. It may only be installed in double-leaf doors
when the inactive leaf can be securely held in place with zero play and the active leaf runs against a stop
edge.
It is designed to provide door locking in security areas and is approved for use in escape doors according
to DIN EN 179 and panic door locks according to DIN EN 1125.
The multi-point lock 319 is only approved fro single leaf panic doors 1 . It is approved for use in fire doors.
The multi-point lock 319 may only be installed in properly functioning door systems. All applicable regula-
tions for the complete door system must be observed.
We recommend using the striking plate which we offer.
The device is suitable for installation according to the installation instructions and use according to the
functional description.
The multi-point lock 319 is suitable for installation in doors with a high usage frequency, which entails little
occasion for care and thus there is a possibility of accidents or misuse (such as office doors).
It is not intended for any other type of use.
1 Note in CPD-0432-0017:
In compliance with provisions in German building law, a type B lock in accordance with DIN EN 1125 can also be used in
the active leaf of a double-leaf door if:
a) the inactive leaf is secured against incorrect use, and
b) the passage width of the active leaf complies with escape route width requirements.