Assa Abloy Effeff 319 Series, Инструкции по установке и монтажу

Страница: 39 / 92

39 Information
EN
Explanation of terms
Pic. 4:
Multi-point lock 319
Pic. 5 :
Rebate gap
1
2
3
4
6
7
5
B
A
- Self-locking system When a door lock has automatic locking , the closed door is always locked.
1 Control events When the door is closed, the control latch extends to the striking plate and is pushed in. In combination
with the position of the striking plate, a check of whether the deadbolt extends takes place (“Self-lock-
ing”, page 42).
2 Latch bolt The latch bolt engages in the locking plate and controls the function of the control latch and the auto-
matic locking.
3 Bolt The bolt is always extended by means of automatic locking when the door is closed.
4 Cylinder fixing
screw The cylinder fixing screw is provided for the fixing of the locking cylinder in the lock case.
5 Face plate The face plate is screwed onto the door.
6 Profile cylinder
cutout The profile cylinder (locking cylinder) is installed in the profile cylinder cutout and screwed into place with
the cylinder fixing screw.
7 Follower / handle
pin The handle pin is a square pin which is guided through the follower and ends in the door handle. With
locks with a split lock nut, the handle pin is also split.
A Backset The backset is the distance from the keyhole centre to the front edge of the face plate.
B Rear backset The rear backset is the distance from the keyhole centre to the rear edge.
– Striking plate The striking plate is the counterpart to the lock installed in the door frame.
– Rebate gap The rebate gap is the distance between the face plate and striking plate (Pic. 5).